What's wrong with the suspension in the car's drive shaft?
發(fā)布時間：2016.11.15 新聞來源：邢臺遠拓汽車零部件制造有限公司
Most of the heavy trucks are pre - drive, and many large buses are also pre - and post - drive for cost saving. Because the distance from the gearbox to the rear axle is longer, the bridge must be used, i.e., a bearing is used to fix the drive shaft in the middle of the crossbeam.
Because the speed of the drive shaft is very high during the operation of the vehicle, the speed of the general diesel car is about 2000 rpm, and the vehicle is running with great vibration. Therefore, the condition of hanging crane is very bad. Coupled with the original hanging is made of rubber, prone to aging phenomenon.
So, this is easy to damage, once damaged, must be replaced immediately, because involving the transmission system, the suspension instability will lead to a lot of other problems.
